Question 1

I keep getting "Low Voltage Warning" on raspberry pi 4, why?

Accepted Answer

Dear customer,

Thank you for choosing Freenove. We are fully responsible for any concerns.
The main reason of this warning is the use of incompatible power supply, or an issue in the power cable

If you have any concerns, please feel free to contact us.

Best regards,
Shaynee
Freenove Support Team

Question 2

Is the power derived from the flat flex cable? it doesn't look like there is any usb or barrel jacks on the monitor.

Accepted Answer

On the one I bought, a 7-inch IPS display, there are two (1 positive and 1 negative) spring loaded (pogo pins) contacts on the LCD that make contact with the +5V and Ground pins on the bottom of the GPIO header when you mount the RPi onto the provided standoffs. GPIO pins 4 and 6. Those pins are still available to use on the top of the GPIO header too.
Alternatively, there was a 2-pin power cable and longer ribbon cables included with the one I bought, for remote mounting the Raspberry Pi some small distance (3-4 inches) away from the LCD display.

Question 3

How do I rotate the touchscreen matrix of this display for portrait mode? I have tried edev and /boot/config.txt nothing works

Accepted Answer

Dear customer,

Thank you for choosing Freenove. We are fully responsible for any concerns.
There are two kinds of display direction rotation: FKMS mode direction rotation and
traditional graphics mode direction rotation.
Because there are many steps, only the second method is sent. If you have any more questions, please contact us by email and we will send you a PDF file.

Method 2: Traditional graphics mode
By default, the Raspberry Pi 3, 2, and 1 series use traditional graphics mode.
Raspberry Pi 4B can also use traditional graphics mode, just in /boot/config.txt file
under the Pi 4:
dtoverlay=vc4-fkms-v3d
Comment out, as shown (Traditional graphics mode is generally not recommended
on Raspberry Pi 4B). In traditional graphics mode, this can be done by adding it at
the end of the /boot/config.txt file:
display_lcd_rotate=x（x=0,1,2,3,0x10000,0x20000）
To set the display orientation, reboot is required to take effect .

If you have any concerns, please feel free to contact us.
Best regards,
Shaynee
Freenove Support Team

Question 4

Can I plus this into the DSI slot on an Orange Pi 5 Plus?

Accepted Answer

Dear customer,

Thank you for choosing Freenove. We are fully responsible for any concerns.

No, it only works with Raspberry Pi.
• Compatible models -> Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+. (No HDMI. Not compatible with any other device.)

If you have any concerns, please feel free to contact us.

Best regards,
Shaynee
Freenove Support Team

Standing screen display size	7 Inches
Screen Resolution	800 x 480
Max Screen Resolution	800 x 480 Pixels
Processor	none
Card Description	Dedicated
Brand	FREENOVE
Item model number	FNK0078B
Operating System	Embedded
Item Weight	12 ounces
Product Dimensions	8.35 x 5.51 x 1.5 inches
Item Dimensions LxWxH	8.35 x 5.51 x 1.5 inches
Color	7 inch IPS touchscreen
Processor Brand	Freenove
Computer Memory Type	SRAM
Voltage	5 Volts (DC)
Manufacturer	Freenove
ASIN	B0B44VZTRG
Country of Origin	China
Date First Available	June 15, 2022

FREENOVE 7 Inch Touchscreen Monitor for Raspberry Pi 5 4 B 3 B+ A+, 800x480 Pixel IPS Display, 5-Point Touch Capacitive Screen, Driver-Free MIPI DSI Port

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App