SABRENT 2.5" HDD SSD to 3.5" mounting frame, Internal hard disk mounting kit adapter, removable frame bracket kit Compatible with all types of 2.5" hard drive / SSD, Screw pack included (BK-HDDH)

To be clear, I pay for all my own stuff so I will give my (sometimes brutally) honest opinion on everything I review so people can make an informed decision before they purchase.So I decided to upgrade an existing 2TB (mechanical) hard drive for a shiny new 2TB solid state drive (SSD).This kit makes it simple to fit the smaller form factor of the new SSD's into the space where an older hard drive would sit.Just mount your SSD onto the cage (screws are supplied and are the smaller ones!) and then mount and secure the cage into the hard drive bay.In case you need it, they also supply the power and data cables to connect up to the hard drive.Heck they have even included a small screwdriver!Everything in the kit appears good quality and it all went together easily enough.Oh and the upgrade to the SSD is highly recommended (Samsung 870).Overall. For around £10 (at time of purchase) this is ridiculously good value!Thanks for reading and I hope you found it useful.

The tray fits perfectly and is easy to install. It can hold 2 SSD drives but may be better to install one drive upside down so that the SATA connectors are easier to access. Mounting screws, SATA cables and power splitter cables were also included. Excellent value.

Very suitable hard drive caddy kit. Both functional and well made compared to cheaper alternatives. It fully met my requirements when installing a 2.5" SSD into an old NZXT PC case that lacked an existing SSD mount.

Setting up my tech kit just got a bit easier with this mounting bracket. It’s robust and versatile, allowing for multiple configurations which perfectly suit my rather eclectic desktop setup. I managed to fit two SSDs in it, and there's enough of an air gap to allay any concerns about overheating. It did take a bit of precision to get the screws in, especially as they can feel a bit tight, but with some patience, it was manageable.The absence of spare screws or detailed instructions meant I had to improvise a bit, but that’s something a seasoned tech enthusiast can handle. Be cautious with the sharp edges – I had a minor scrape with one that nearly sent me searching for a plaster. The compartments are a bit snug, so some SATA cables might need a touch more care to fit in properly. However, once connected, the setup is reliable.In the end, it’s a well-crafted piece of kit that simplifies upgrading my system significantly. My only real gripe? I wish they’d included those extra screws!

I think this has got to be one of the best value drive mounting kits I've ever come across with the added benefit of being able to install 2.5" HDD/SSD to one 3.5" drive bay in your computer. This means you can essentially double the amount of HDD/SSD drives you can install to your computer which will be especially useful for very small form factor builds.This kit contains absolutely everything you need to the job - right down to the screw driver! It contains the following items:- 3.5" drive bracket- 2 x SATA data cables with securing clips- SATA Socket to 2 x SATA Plug power splitter- Molex to 2 x SATA Power splitter- 8 x Screws for SSD/HDD drives- 4 x Screws for mounting the 3.5" bracket into the drive bay- Small screw driverAll of the parts are decent quality and I had no issues such as poorly threaded screws etc.As an experienced user this was a complete doddle and only took a few minutes before it was installed and working. I even ended up with some spare parts which I threw in my PC spares box!I installed 2 x Samsung EVO 860 drives into the bracket which fit perfectly and there was a few millimetre gap between the drives. The Samsung EVO drives are quite thin (6.8 mm) but I suspect you could install thicker drives into this bracket (but you may adversely affect airflow in doing so).The instructions are somewhat vague with just an exploded diagram of the bracket with where the screws and drives go. Make sure you mount the drive(s) the right way around in the bracket when you are installing them because it is possible to install them back to front and then the bracket probably won't fit properly in the computer because the bracket's screw holes won't line up.Overall this is an excellent kit and I highly recommend it.Pros:- Amazing value and probably difficult to buy all the included parts for a similar price- Decent quality cables and parts- Everything required is included in the box (including a screw driver!)Cons:- The instructions may be a little vague for novice users

Good, comprehensive kit, adapter itself is made out of metal and has all of the mounting screws you may need and a decent quality screwdriver included.Also in the kit are 2x good quality sata cables, and 2x sata power splitters.In my case, as pictured, it made a very neat job of installing 2x 2.5" sata SSDs directly in to the 3.5" cage of a dell optiplex desktop tower. Allows for neat cable management, and no more ssd rattling around untethered in the case. Recommended kit for the money, especially given the included extras.

Perfect product. Screws to mount 2 drives, screws to mount the frame to the case, 2 power splitters, one SATA, one molex, and finally 2 SATA cables, one with a right angle plug at one end. as I want more airflow I mounted one SATA drive under the frame, upside down, and the other on the top mount position, also upside down. Simple, more solidly made than I expected at the price, and with all the cables I need. All good. Ooh, nearly forgot, also include a little screwdriver so no need to find one if you want to install it as soon as it arrives.One last thing, the box it arrives in will make you believe you've been conned, until you open it and find everything present and correct. Will be looking for other products sold by this company.